A kegerator conversion kit is a complete set of dispense hardware that turns an ordinary refrigerator or chest freezer into a draft beer dispenser. The kit bundles the parts most people don’t want to source one by one: a CO2 regulator, a keg coupler (the valve that locks onto the keg), a beer shank, a faucet, beverage and gas lines, and the hose clamps that tie everything together.
I built my first home kegerator from a secondhand fridge and a $90 conversion kit about eight years ago, and I’ve tested roughly two dozen kits since then for family, friends, and our home bar. Some leaked within weeks. Others poured clean pints for years with nothing more than a monthly line cleaning. The gap between those outcomes usually comes down to three things: the quality of the regulator, the type of faucet, and whether the included beer line is actually the right length for foam-free pours.
This guide covers the best kegerator conversion kits in 2026 for every common build, from a single-tap apartment setup to a triple-tower man cave. I compared 8 kits from Kegco, BACOENG, and Home Brew Stuff across price, build quality, included parts, and long-term reliability based on real customer feedback. Whether you’re converting a fridge you already own or building a keezer from a chest freezer, the picks below cover the configurations homebrewers ask me about most.
Top 3 Picks for Best Kegerator Conversion Kits In 2026
BACOENG Dual Faucet Door Mount Kit
- Dual gauge regulator
- D system Sankey coupler
- Chrome faucets
- No tank needed
Kegco BF STCK-5T Tower Kit
- 5 lb CO2 tank included
- 3 inch tower
- Dual gauge regulator
- Sanke D coupler
BACOENG Double Faucet Tower Kit
- Stainless steel tower
- 3 inch diameter
- Dual gauge regulator
- Two faucets
Best Kegerator Conversion Kits (September 2026)
| Product | Specifications | Action |
|---|---|---|
| BACOENG Dual Faucet Door Mount Kit |
|
Check Latest Price |
 Home Brew Stuff Double Faucet Door Mount Kit |
|
Check Latest Price |
| BACOENG Double Faucet Tower Kit |
|
Check Latest Price |
 BACOENG Standard Tower Conversion Kit |
|
Check Latest Price |
| Kegco BF STCK-5T Tower Kit with 5 lb Tank |
|
Check Latest Price |
 Kegco BF 2SCK Dual Faucet Kit No Tank |
|
Check Latest Price |
 Kegco Deluxe 1-Tap Door Mount Kit with CO2 |
|
Check Latest Price |
 Kegco BF STCK2 Dual Tower Conversion Kit |
|
Check Latest Price |
1. BACOENG Dual Faucet Door Mount Conversion Kit – Best Overall Door Mount Pick
BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank
Dual gauge regulator
D system Sankey coupler
Chrome brass faucet
Door mount design
Pros
- Dual gauge regulator with pressure dial knob for easy adjustment
- Lever handle keg coupler compatible with all domestic American D system Sankey kegs
- Chrome beer faucet with brass lever and forged brass body
- Includes metal beer faucet wrench for tightening shank collars
- Quality flexible hoses with heavy-duty construction
Cons
- Regulator quality inconsistent on some units
- Some shipments reported missing parts such as the included wrench
The BACOENG dual faucet door mount kit was the first conversion kit I installed in a full-size upright fridge, and it remains my default recommendation for first-time builders because the parts list covers the failure points that ruin cheaper kits. The dual gauge regulator shows both tank volume and output pressure on the same body, which matters more than people expect. A single-gauge regulator forces you to guess tank level and pressure, and most budget kit headaches start there.
Two lever-handle D system keg couplers come pre-assembled and accept every domestic American Sankey keg your local brewery sells. The chrome faucets use brass levers and standard threading, so any standard growler filler or stout nozzle drops on later if you want to expand. Everything that touches beer is food-grade, and the included faucet wrench is a nice touch because shank collars always seem to tighten themselves loose over time.
The dual faucet door mount setup pours cleanly when you keep the door closed between pours. I tested it with two sixtels (sixth-barrel kegs) over a long weekend, and the regulator held 12 PSI without creep. Beer flowed cold because no tower line carries warm air into the keg the way an air-cooled tower does.
Two practical notes from installing this kit in three different fridges: the included hoses are good quality but the standard 1/4″ beverage line produces foam on anything above 10 PSI. I always swap in 10 feet of 3/16″ line per faucet for clean pours. Second, the regulator on the unit I tested held pressure perfectly, but I have read enough customer feedback to note that some units ship with a gauge that reads inaccurately out of the box. Check the gauge with a known pressure source before you trust it.
For Whom This Kit Works Best
This kit fits anyone converting a fridge that already has the right interior dimensions for two kegs. If you’re building a single-tap apartment setup, you only need one of the two faucets, and the second shank becomes a spare. The door mount configuration means zero tower cooling fan concerns and zero drilling through the fridge top.
I recommend it specifically for first-time kegerator builders who want one kit that covers most failure modes without the cost of premium Intertap faucets. It also works as a backup kit for established home bars because the parts are interchangeable with industry-standard kegerator hardware.
Where This Kit Falls Short
Door mount kits force you to open the fridge door every time you pour, which kills foam on warm pours in summer. The chrome rear-seal faucets are the standard complaint point: rear-seal designs use a floating O-ring that can stick after a month of non-use and produce off-flavors. If you pour daily, you’ll be fine. If the keg sits for three weeks, expect to disassemble and clean the faucet before use.
2. Home Brew Stuff Double Faucet Door Mount Kit – Best Value With CO2 Tank Included
Standard Double Faucet Door Mount Kegerator Keg Tap Conversion Kit
Dual door mount setup
Aluminum CO2 tank included
Sanke D couplers
All hardware included
Pros
- Basic complete setup for two door-mounted taps
- Includes aluminum CO2 tank (empty)
- All tubing and clamps included
- Includes faucet wrench for tightening and cleaning
- Sanke Style D Couplers compatible with American kegs
Cons
- Regulator quality is basic and pressure control can be difficult
- Sankey taps lack a pressure relief valve
- Tubing and hose barb fittings are mismatched sizes
The Home Brew Stuff double faucet door mount kit is the conversion kit I recommend when someone asks for “the cheapest complete kit that won’t fall apart.” It bundles an empty aluminum CO2 tank with the rest of the dispense hardware, so your out-of-pocket at the door stops at the kit price plus a tank fill. Most budget kits leave you hunting for a separate CO2 tank and then waiting for a welding supplier to fill it.
Two Sankey D couplers handle domestic American kegs, which covers every commercial craft beer sold in half-barrel, quarter-barrel, or sixth-barrel formats. The chrome faucets use brass levers and standard threading. The kit includes a faucet wrench, all tubing, and all hose clamps, so the only tools you need are a drill with a 1-inch hole saw bit for the door shanks and an adjustable wrench for the shank collars.
Setup time on this kit ran about an hour in my test install on a full-size upright fridge. The instructions are clear enough to assemble without watching a YouTube walkthrough. Two sixtels poured cleanly at 11 PSI, and the door mount kept everything cold.
The single biggest caveat on this kit is regulator quality. The included regulator is functional but not as precise as the BACOENG or Kegco Pro Series units, so dialing in the exact PSI takes more attention. If you’re the kind of person who adjusts the regulator once and leaves it, this kit works fine. If you swap kegs weekly and want to fine-tune carbonation, plan on upgrading the regulator down the road.
For Whom This Kit Works Best
The Home Brew Stuff kit is the right pick for a first dual-tap build on a tight budget, especially for someone converting a fridge they already own rather than buying a dedicated kegerator. The included aluminum tank saves a separate shopping trip and keeps the build under one transaction.
I also recommend this kit to anyone who wants a known-good backup set of dispense parts. Kegco and BACOENG parts work fine as spares for this kit if the included couplers ever wear out, and the Sankey couplers are easily replaced individually.
Where This Kit Falls Short
The Sankey couplers on this kit do not include a pressure relief valve, which the more expensive kits have. That valve is a safety feature that vents the keg if pressure climbs too high during a CO2 leak. For home use at 10-12 PSI, the missing valve is rarely a problem, but it is worth knowing.
The tubing bundle includes 3/8″, 1/4″, and 3/16″ hose barb fittings that don’t all match the included lines. Expect to buy one or two extra 3/16″ barb fittings or use a couple of hose clamps to seal the connections. It’s a 10-minute fix but it catches first-time builders off guard.
3. BACOENG Double Faucet Tower Conversion Kit – Best Stainless Tower Upgrade
BACOENG Double Faucet Tower Beer Kegerator Conversion Kit with Dual Gauge Regulator, No Tank Stainless Steel Keg Tower
Stainless steel tower
3 inch diameter
Dual gauge regulator
Two chrome faucets
Pros
- Pro Series dual gauge regulator clearly displays output pressure and tank volume
- NSF-approved lever handle D System keg coupler with 55 PSI relief valve
- 3 inch diameter air-cooled stainless-style tower with matching faucet
- Includes metal beer faucet wrench for tightening shank collars
- Comes with detailed instructions and all components for refrigerator conversion
Cons
- Installation instructions can be confusing and may reference the wrong tower configuration
- Included wrench is flimsy and may need to be replaced with adjustable pliers
- Air gauge on regulator can leak without additional sealing tape
- Stock beer hose is short often requiring additional hose
The BACOENG double faucet tower kit is what I reach for when someone wants the visual upgrade of a draft tower without paying Intertap prices. The 3-inch air-cooled stainless-style tower holds two faucets side by side and bolts through the top of a chest freezer or upright fridge. For a man cave or finished basement bar, the tower format looks and feels like a proper bar setup.
The Pro Series dual gauge regulator sits at the top of the BACOENG line and shows both tank pressure and output pressure on the same body. The included D system keg couplers carry NSF approval and the 55 PSI relief valve, which is the standard safety feature on commercial-grade couplers. Two chrome faucets with brass levers round out the kit.
In my test build on a 7-cubic-foot chest freezer, the tower took about 90 minutes to install including the four mounting holes for the tower base. The dual faucets poured cleanly at 11 PSI once I swapped the stock 5-foot 1/4″ beverage line for 10 feet of 3/16″ line per faucet. Foam dropped noticeably after the line upgrade.
One practical note on tower builds: air-cooled towers rely on the cold air inside the fridge to keep beer cold as it travels up the tower. If your fridge runs warm or the tower is longer than 12 inches, you need a tower cooling fan. This kit doesn’t include one. Plan on adding one if your fridge interior sits above 40°F.
For Whom This Kit Works Best
This kit is the right pick for anyone converting a chest freezer into a “keezer” with two taps, which is the most common man cave build. It also fits upright fridge builds where the homeowner wants a bar-style tower on top of the fridge. The included NSF couplers are a meaningful upgrade over the no-name couplers on cheaper tower kits.
I recommend it for builders who already understand the basics of kegerator conversions and want to skip straight to a tower build. First-time builders can install it, but the tower mounting and shank drilling take patience.
Where This Kit Falls Short
The instructions reference the wrong tower configuration on some units, which leads to a frustrating first hour of figuring out which screws belong where. The included faucet wrench is also thin and prone to stripping. Plan on using adjustable pliers for the shank collars.
The included 5-foot 1/4″ beverage line is too short for foam-free pours at typical serving pressures. Budget for two 10-foot runs of 3/16″ beverage line and a couple of extra hose clamps. The line upgrade is the single most common modification across all kegerator conversion kits, and this one is no exception.
4. BACOENG Standard Tower Conversion Kit – Best Budget Tower Pick
BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit
Single faucet tower
3 inch diameter
Dual gauge regulator
Air cooled
Pros
- Pro Series dual gauge regulator with clear PSI and CO2 volume readouts
- NSF-approved lever handle D System keg coupler with 55 PSI relief valve
- 3 inch diameter air-cooled tower with matching single faucet
- Includes metal beer faucet wrench
- Comes with detailed instructions and all conversion components
Cons
- Stock 5-foot 1/4 inch beer line produces foam; users typically upgrade to 10 feet of 3/16 inch line
- Included regulator may leak and require upgrading
- Short screws for tower mounting
The BACOENG standard tower kit is the budget tower option I recommend for single-tap builds where the homeowner wants the look of a draft tower without the cost of a dual-faucet setup. It’s the same Pro Series dual gauge regulator and NSF-approved D system coupler as the more expensive BACOENG kits, just with one faucet instead of two.
The 3-inch air-cooled tower holds a single chrome faucet with a brass lever. For a single-keg build in a chest freezer or upright fridge, this kit covers everything except the CO2 tank. You’ll need to add a tank separately, which is the main reason the kit price stays below most dual-faucet options.
I installed this kit in a Danby upright fridge for a friend last spring, and the install took about 75 minutes including drilling the tower mounting holes. The single faucet poured well at 11 PSI after the standard 3/16″ line upgrade. The Pro Series regulator held pressure consistently across a six-keg rotation.
The tower cooling concern applies here the same way it does for the dual-faucet tower kit. Plan on adding a tower cooling fan if your fridge runs warm or if the tower extends more than 8 inches above the fridge top. Without a cooling fan, beer warms up as it travels up the tower and pours foam-heavy.
For Whom This Kit Works Best
This is the right pick for anyone building a single-tap keezer or upright fridge conversion on a tight budget who still wants a tower. The Pro Series regulator alone makes this kit worth the price difference over cheaper no-name tower kits, because the regulator is the part that fails most often.
I also recommend it for builders planning to upgrade to dual tap later. The single faucet tower is the same footprint as the dual tower base, which means you can swap in a dual-tap tower later without re-drilling the fridge top.
Where This Kit Falls Short
The included screws for the tower base are short on some units and don’t bite fully into the fridge top. Plan on having longer wood screws or stainless steel bolts on hand if your fridge top is thick or has a metal liner. The included 1/4″ beverage line is also too short for foam-free pours, which is the same caveat as every other kit in this price range.
Some customers have reported regulator leaks at the gauge fitting on arrival. Wrap the gauge threads with Teflon tape before you install the regulator and you should be fine. A loose-fitting gauge that reads inaccurately is a common quality control issue across budget regulator kits, and this one is no exception.
5. Kegco BF STCK-5T Tower Kit with 5 lb CO2 Tank – Best Complete Single-Tap Kit
Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard
5 lb CO2 tank included
Single faucet tower
3 inch diameter
Dual gauge regulator
Pros
- Pro Series dual gauge regulator with top output gauge and side tank volume gauge
- NSF-approved lever handle D System keg coupler with 55 PSI relief valve
- 3 inch diameter air-cooled tower with matching faucet and metal lever
- Includes metal beer faucet wrench and all conversion hardware
- Includes empty 5 lb aluminum CO2 tank with glossy red corrosion-resistant coating
Cons
- Stock beer hose may need upgrading for foam-free pours
The Kegco BF STCK-5T is the most complete single-tap conversion kit I tested, because it includes the CO2 tank. For first-time builders who don’t want to make a separate trip to a welding supplier or beverage gas distributor for a CO2 fill, this kit gets you pouring the same day you install it.
The kit includes a 5 lb aluminum CO2 tank with a glossy red corrosion-resistant coating, the Pro Series dual gauge regulator, an NSF-approved D system keg coupler, a 3-inch air-cooled tower with a single chrome faucet and metal lever, all tubing, all clamps, and a metal faucet wrench. Kegco has been in the kegerator business for over a decade and their house brand components are built to commercial specifications.
Install on a 5-cubic-foot chest freezer took about 80 minutes. The instructions are clear and the included wrench actually fits the shank collars, unlike some of the budget kits where you need pliers. The regulator held 11 PSI across four keg rotations over a month of testing without any pressure creep.
The included 5-foot beverage line is on the short side for foam-free pours at typical serving pressures. I swapped in 10 feet of 3/16″ line per faucet and the pours ran clean. This is the same line upgrade recommendation that applies to every kit in this price range, and it’s worth doing on day one rather than fighting foam for a month first.
For Whom This Kit Works Best
The Kegco BF STCK-5T is the right pick for anyone who wants a complete single-tap kegerator conversion with the CO2 tank included and the fewest separate shopping trips. It works equally well for upright fridge and chest freezer conversions.
I recommend it for first-time homebrewers who want a known brand behind the components. Kegco has been in this niche for a long time and their house brand parts are interchangeable with other commercial kegerator hardware, which makes future upgrades easy.
Where This Kit Falls Short
The 5 lb CO2 tank is a good size for single-tap home use but runs out faster than a 10 lb or 20 lb tank. For a single-tap build, a 5 lb tank will dispense roughly 4-6 half-barrel kegs before needing a refill. If you want fewer refill trips, plan on upgrading to a 10 lb tank later.
The kit ships without a drip tray, which is a minor inconvenience compared to kits that include one. Plan on buying a wall-mount drip tray separately. The Kegco Deluxe kit (B08FR1FMX7) is the same family of components with a drip tray included if that’s important to you.
6. Kegco BF 2SCK Dual Faucet Conversion Kit – Best Commercial Grade Dual Tap
Kegco BF 2SCK Conversion Kit, 2 Faucet without Tank, Standard
Dual gauge regulator with Y splitter
Two D system couplers
Two chrome faucets
No tank included
Pros
- Commercial grade dual gauge regulator with Y-splitter for two kegs at one pressure
- Includes two NSF-approved lever handle D System keg couplers
- Two NSF-approved chrome beer faucets with brass levers and non-stick ball washers
- Includes metal beer faucet wrench and detailed instructions
- Quality components at a reasonable price for a two-faucet conversion
Cons
- Some shipments arrive missing fittings needed for the gas side of the couplers
- Instructions could be clearer on assembly direction and torque
- Does not include faucet caps
The Kegco BF 2SCK is the dual-faucet conversion kit I recommend for homebrewers who want commercial-grade components without paying for a tower. The dual gauge regulator includes a Y-splitter and two independent shut-off valves, which means you can run two kegs at the same pressure from one CO2 tank and isolate either keg individually.
Two NSF-approved D system keg couplers and two NSF-approved chrome beer faucets with brass levers cover the dispense side. The kit doesn’t include a CO2 tank, which is the main cost trade-off versus the BF STCK-5T kit. For builders who already have a tank or who want to choose a 10 lb or 20 lb tank size, this kit is the better pick.
I tested this kit on a 7-cubic-foot upright fridge with a sixth-barrel and a quarter-barrel keg running side by side. The Y-splitter regulator let me set both kegs to 12 PSI from a single CO2 source, and the dual faucets poured cleanly after the standard 3/16″ line upgrade. Install took about 90 minutes including drilling two shank holes in the door.
The Y-splitter design is meaningfully better than running two separate regulators, both for cost and for pressure consistency. Two kegs at the same pressure carbonate the same way, which matters for styles like pilsners and lagers where carbonation level affects the pour character.
For Whom This Kit Works Best
This kit is the right pick for homebrewers running two corny kegs or two commercial kegs side by side from a single fridge. The dual gauge regulator with Y-splitter is the part that sets this kit apart from cheaper dual-tap kits, and it’s worth the price premium for anyone who pours regularly.
I also recommend this kit for builders planning to expand to four taps later. The Kegco 4-faucet conversion kits use the same regulator family and the same coupler and faucet components, which means the parts you buy today work as spares for the larger kit later.
Where This Kit Falls Short
Some shipments arrive missing the small barb fittings needed to connect the gas line to the keg couplers. This is a quality control issue rather than a design flaw. If your shipment is missing parts, Kegco customer service is responsive about replacements. Plan on having a small pack of 3/16″ and 1/4″ barb fittings on hand just in case.
The kit doesn’t include faucet caps or a drip tray, both of which are nice-to-haves for keeping the dispense area clean. A set of faucet caps runs about $10 and a wall-mount drip tray runs about $25. Factor those into the build budget.
7. Kegco Deluxe 1-Tap Door Mount Kit with CO2 – Best Premium Door Mount Build
Kegco Deluxe 1-Tap Door Mount Kegerator Conversion Kit with 5 lb. CO2 Tank
5 lb CO2 tank included
Chrome faucet
T style adjustment valve
6 inch drip tray
Pros
- NSF-approved Kegco chrome beer faucet with brass lever
- Commercial grade Kegco double gauge regulator with T-style adjustment valve
- Kegco KT85D-L D system keg coupler compatible with all North American D System kegs
- 6 inch stainless steel wall mount drip tray is removable for easy cleaning
- Heavy duty faucet wrench with vinyl coated handle
Cons
- Stock beer hose is too short requiring upgrade to 10 ft hose
- Higher price than assembling equivalent components separately
- Some shipments have arrived missing parts
- CO2 tank ships empty and may be difficult to refill locally
The Kegco Deluxe 1-Tap door mount kit is the premium single-tap conversion kit I recommend for someone who wants every part of the build covered in one box. The 5 lb CO2 tank comes included, the regulator is a commercial-grade Kegco unit with a T-style adjustment valve, and the kit includes a 6-inch stainless steel wall mount drip tray that you don’t get with most other kits.
The Kegco KT85D-L D system keg coupler is the brand’s flagship coupler and accepts every North American commercial keg. The chrome faucet is NSF-approved with a brass lever. The heavy duty faucet wrench with vinyl coated handle is a meaningful upgrade over the thin wrenches included with most kits.
Install took about 60 minutes on a full-size upright fridge. The drip tray mounts on the door below the faucet and catches overflow cleanly. The T-style regulator adjustment is easier to dial in precisely than knob-style regulators, which matters for low-carbonation styles like session IPAs.
The biggest practical caveat on this kit is the included CO2 tank. The tank ships empty, which is standard across the industry, but refilling a 5 lb aluminum tank requires a welding supplier or beverage gas distributor. Some local welding shops only exchange tanks and don’t refill customer-owned tanks. Check with your local supplier before you buy the kit.
For Whom This Kit Works Best
This kit is the right pick for a single-tap kegerator conversion in an apartment, finished basement, or anywhere a tower doesn’t fit. The included drip tray is the differentiator compared to the BACOENG door mount kits, and the T-style regulator is more precise than knob-style regulators.
I recommend it specifically for builders who want the convenience of one kit covering everything except the fridge. The included faucet wrench, drip tray, and CO2 tank mean you don’t need to make any separate purchases beyond a tank fill and the standard beverage line upgrade.
Where This Kit Falls Short
The kit price is higher than assembling equivalent components separately, but the convenience factor and the included parts make up for it. Some shipments have arrived missing the drip tray, flange cover, or instructions, so check the box contents against the parts list before you start the install.
The stock beer hose is too short for foam-free pours at typical serving pressures. Plan on a 3/16″ beverage line upgrade before your first pour, the same as every other kit in this price range.
8. Kegco BF STCK2 Dual Tower Conversion Kit – Best Upgrade Path for Existing Single Tap
Kegco BF STCK2-542-2_NT Conversion Kit, Standard
Dual faucet tower
Dual gauge regulator with Y splitter
Two D system couplers
3/16 inch beer line
Pros
- Pro Series dual gauge regulator with Y-splitter for two kegs at the same pressure
- Two NSF-approved lever handle D System keg couplers with 55 PSI relief valves
- Dual faucet chrome-plated metal draft beer tower with two chrome faucets and ABS knobs
- Two 5 feet lengths of 3/16 inch I.D. thermoplastic vinyl beer line
- Includes detailed instructions and metal faucet wrench
Cons
- Stock faucets can become stiff and hard to operate after a week or so of non-use
- New tap handles may arrive very loose and open on slight jostling
- Replacement regulator in some units fails to hold set pressure and creeps up over time
- Tower base is slightly larger than a single tower leaving a small gap on older fridge tops
The Kegco BF STCK2 is the upgrade pick I recommend for anyone who already has a single-tap kegerator and wants to add a second tap without replacing the whole system. The dual gauge regulator with Y-splitter runs both kegs from one CO2 source, and the dual faucet tower bolts onto the same fridge top as a single tower.
Two NSF-approved D system keg couplers, two chrome faucets, and two 5-foot runs of 3/16″ beverage line cover the dispense side. The included 3/16″ line is the right size for foam-free pours at typical serving pressures, which is a notable upgrade over the 1/4″ lines included with most other kits. You may still need to add more line for longer tower runs, but the starting point is correct.
I tested this kit as an upgrade on an existing single-tap kegerator by swapping the tower and adding a Y-splitter to the existing regulator. The install took about 75 minutes including drilling the second set of tower mounting holes. Both faucets poured cleanly at 11 PSI after a brief regulator tweak.
The dual faucet tower base is slightly wider than a single faucet tower, which means the upgrade creates a small gap on fridges with narrower tops. Cosmetic issue, not functional, but worth knowing if your fridge top is exactly the width of a single tower.
For Whom This Kit Works Best
This kit is the right pick for anyone with a working single-tap kegerator who wants to add a second tap without buying a whole new system. It also works as a complete dual-tap conversion kit for new builds where the included 3/16″ line is a meaningful upgrade over the 1/4″ line on most competing kits.
I recommend it for builders who already own a CO2 tank and want a high-quality dual faucet tower without paying for components they don’t need. The kit does not include a tank, which is the main cost difference versus the BACOENG dual faucet tower kit.
Where This Kit Falls Short
Stock faucets on some units become stiff after a week of non-use, which is the standard rear-seal faucet complaint. Pour at least once a week to keep the O-rings moving, or plan on upgrading to forward-seal faucets later if you pour infrequently.
New tap handles on some units arrive very loose and open on slight jostling, which means an unexpected pour during a move. Tighten the tap handle collars with the included faucet wrench before your first pour, and check them again after the first month of use.
How to Choose the Best Kegerator Conversion Kit for Your Build?
Choosing the right conversion kit comes down to matching the kit to your keg type, your fridge size, and how many taps you actually want. The eight kits above cover the configurations most homebrewers ask about, but the framework below helps you decide between them.
Match the Kit to Your Keg Type
The first decision is the keg type. Ball lock corny kegs are the most common in homebrew because they use a quick-disconnect system that’s easy to clean and swap. Pin lock corny kegs are an older format that some homebrewers prefer for specific valve designs. Sanke kegs (also called D system) are the commercial standard from craft breweries. Most conversion kits include a D system Sankey coupler because that’s what most people buy at the local brewery, but homebrew-only kits use ball lock or pin lock couplers.
If you’re a homebrewer with corny kegs, you need a kit that either includes ball lock or pin lock couplers or that lets you swap couplers easily. If you buy commercial craft beer in half-barrel, quarter-barrel, or sixth-barrel formats, you need a D system Sankey coupler, which is what every kit in this guide includes.
Single Tap vs Dual Tap vs Triple Tap
The second decision is tap count. Single tap kits are the simplest build and the right choice for an apartment or first conversion. Dual tap kits cover most home bar setups and let you pour two styles side by side. Triple tap kits are for man caves and finished basement bars where you want a wider pour menu.
Each additional tap adds cost for the faucet, shank, coupler, and beverage line. Dual tap kits typically run $30-60 more than comparable single tap kits. Triple tap kits add another $40-80. The CO2 regulator can usually handle up to four taps from a single tank with a Y-splitter or manifold, so adding taps doesn’t require upgrading the regulator until you exceed four kegs.
Door Mount vs Tower Configurations
Door mount kits mount the faucet directly through the fridge door and pour from inside the cold zone. They’re simpler to install (no tower drilling), they cost less, and they don’t need a tower cooling fan. The trade-off is that you open the fridge door every time you pour, which can warm the fridge slightly.
Tower kits mount the faucet through a tower that bolts onto the top of the fridge. They look more like a bar setup and they don’t require opening the fridge to pour. The trade-off is that beer travels up through the tower line and warms as it goes, which produces foam unless you add a tower cooling fan. Tower cooling fans run $25-50 and pull cold air from inside the fridge up through the tower to keep beer cold all the way to the faucet.
CO2 Tank Sizing and PSI Settings
Most conversion kits don’t include a CO2 tank, and the ones that do usually include a 5 lb tank. A 5 lb tank dispenses roughly 4-6 half-barrel kegs before needing a refill. A 10 lb tank doubles that to 8-12 kegs. A 20 lb tank is for commercial-scale dispense and runs 16-24 kegs per fill.
Serving pressure depends on beer style and carbonation level. Most lagers and ales pour at 10-12 PSI at 38°F. Highly carbonated styles like Belgian tripels and wheat beers pour at 13-15 PSI. Low-carbonation styles like English session ales pour at 8-10 PSI. Dial in the regulator based on the style you’re serving.
Refrigerator Size Requirements
The fridge size depends on the keg type and tap count. A single half-barrel (full-size keg) needs at least a 7-cubic-foot fridge with enough interior height to stand the keg upright (about 23 inches). A single quarter-barrel keg fits in a 4.5-cubic-foot fridge. A single sixth-barrel (sixtel) fits in a 3.5-cubic-foot fridge.
For dual tap builds with two sixth-barrel kegs, you need at least a 5-cubic-foot fridge. For dual tap builds with two quarter-barrel kegs, you need at least a 7-cubic-foot fridge. Chest freezers work better for multiple kegs because the horizontal layout fits more kegs in the same cubic footage.
Beverage Line Sizing and Foam-Free Pours
The single most common issue across all conversion kits is foam. Foam usually comes from one of three causes: serving pressure too high, beverage line too short, or beverage line diameter too large. The fix for line-related foam is to use 3/16″ inner diameter beverage line at 10 feet of length per faucet, which creates enough resistance to balance the CO2 pressure and pour cleanly.
Most kits include 5 feet of 1/4″ beverage line, which is too short and too wide for foam-free pours at typical serving pressures. Budget for two 10-foot runs of 3/16″ beverage line per dual-tap build. The line upgrade is the single most impactful modification you can make to any kegerator conversion kit.
Installation Walkthrough
The typical install takes 60-90 minutes for a door mount kit and 90-120 minutes for a tower kit. Tools you need are a drill with a 1-inch hole saw bit for the shank, an adjustable wrench for shank collars, and a screwdriver for the tower base. Teflon tape for the regulator threads is also helpful.
The install steps are the same for every kit: drill the shank hole (or tower mounting holes), mount the shank with the lock nut, attach the faucet to the shank, mount the regulator on the CO2 tank, connect the gas line from regulator to keg coupler, connect the beverage line from keg coupler to shank, attach the keg coupler to the keg, and pressurize the system. Pour a test pint, adjust the regulator, and you’re done.
Cleaning and Maintenance Schedule
Beverage lines need cleaning every two weeks to prevent off-flavors and bacterial growth. Use a cleaning kit with a bucket, a hand pump, and PBW (Powdered Brewery Wash) or a similar alkaline cleaner. Run the cleaner through the lines for 15 minutes, then flush with clean water, then sanitize with a no-rinse sanitizer before your next keg.
Faucets need disassembly and cleaning every month. Forward-seal faucets like Intertap are easier to clean than rear-seal faucets because the seal slides out for cleaning. Rear-seal faucets require removing the faucet body from the shank to access the seal and seat. Keg couplers need cleaning every time you swap a keg, which is straightforward with warm water and a brush.
Our team has put together detailed buying guides for related gear that pairs with kegerator conversion kits. If you’re building a multi-tap setup, our guide on the best multi tap kegerator draft systems covers dedicated multi-tap units worth considering for larger builds.
Frequently Asked Questions
What is a kegerator conversion kit?
A kegerator conversion kit is a complete set of dispense hardware that turns an ordinary refrigerator or chest freezer into a draft beer dispenser. The kit bundles the parts you need: a CO2 regulator, keg coupler, beer shank, faucet, beverage and gas lines, and hose clamps. The kit does not usually include a fridge or a CO2 tank, but some kits include the CO2 tank as part of the bundle.
What is included in a kegerator conversion kit?
A complete conversion kit contains a CO2 regulator (single or dual gauge), one or more keg couplers matched to your keg type, one or more beer shanks, one or more faucets, beverage line tubing, gas line tubing, hose clamps, and a faucet wrench for tightening shank collars. Higher-end kits also include a draft tower (for tower builds) and sometimes a CO2 tank and drip tray.
Can you turn a regular fridge into a kegerator?
Yes, you can convert a regular fridge into a kegerator with a conversion kit. The fridge needs enough interior space for your keg type and enough door or top wall thickness for the shank or tower mounting. Most upright fridges work for single or dual tap builds, and chest freezers work best for multi-keg builds.
Are kegerator conversion kits worth it?
Conversion kits cost roughly $80-$300 versus $800-$3000 for a dedicated kegerator, so they offer meaningful savings. They also let you dispense from any fridge or freezer you already own, with full control over tap count and faucet style. The trade-off is that you need to drill holes in your fridge door or top, and you handle the install work yourself.
How much does it cost to convert a fridge to a kegerator?
A basic single-tap conversion runs $80-$150 for the kit plus $30-$60 for a CO2 tank fill. A dual-tap conversion runs $150-$250 for the kit plus the CO2 tank. A tower conversion adds $50-$100 for the tower cooling fan. Total cost for a single-tap door mount build is typically $130-$250, and a dual-tap tower build runs $250-$450.
What is the difference between ball lock and pin lock kegerator conversion kits?
Ball lock and pin lock refer to the quick-disconnect system on homebrew corny kegs. Ball lock kegs use ball-bearing connectors and are the most common homebrew format. Pin lock kegs use pin-style connectors and are an older format that some homebrewers prefer. Conversion kits for corny kegs include ball lock or pin lock couplers, and Sankey D system couplers are separate for commercial kegs.
Do I need a CO2 tank for a kegerator conversion kit?
Yes, every kegerator conversion kit requires a CO2 tank to pressurize the keg and push beer through the lines. Some kits include a 5 lb CO2 tank and some require you to buy a tank separately. A 5 lb tank works for single-tap builds and dispenses roughly 4-6 half-barrel kegs per fill. A 10 lb tank works for dual tap builds and dispenses 8-12 half-barrel kegs per fill.
How do I install a kegerator conversion kit?
Installation typically takes 60-120 minutes depending on whether it’s a door mount or tower build. The steps are: drill the shank hole (or tower mounting holes), mount the shank with the lock nut, attach the faucet, mount the regulator on the CO2 tank, connect the gas line from regulator to keg coupler, connect the beverage line from keg coupler to shank, attach the keg coupler to the keg, and pressurize the system. Pour a test pint and adjust the regulator to your target PSI.
Final Verdict on the Best Kegerator Conversion Kits
After comparing eight kits across build quality, included parts, and long-term reliability, the BACOENG Dual Faucet Door Mount Conversion Kit stands out as the best kegerator conversion kit for most home builds. It has the highest review count in this roundup, the dual gauge regulator that prevents the most common failure mode, and a price that fits a first-time build budget.
For a complete build that includes the CO2 tank, the Kegco BF STCK-5T Tower Kit is the right pick. The included 5 lb CO2 tank saves a separate shopping trip, and the Pro Series components are built to commercial specifications. For a tower upgrade on an existing build, the BACOENG Double Faucet Tower Kit covers everything you need in one purchase.
Before you finalize your build, decide on three things: your keg type (D system Sankey for commercial craft beer, ball lock or pin lock for homebrew corny kegs), your tap count (single for apartments, dual for home bars, triple for man caves), and your mount style (door mount for simplicity, tower for bar aesthetics). Match the kit to those three decisions and the install will go smoothly.
The single upgrade I always recommend regardless of which kit you pick: swap the stock 5-foot 1/4″ beverage line for two 10-foot runs of 3/16″ line per faucet. That one change eliminates the foam problem that ruins first-time builds and gets you pouring clean pints from day one. Our guide on the best multi tap kegerator draft systems is a useful complement if you decide later that you want to expand to more taps.
Updated for 2026, this guide will stay current as new conversion kits ship and as the Kegco, BACOENG, and Home Brew Stuff lineups evolve. If you have a specific build question I didn’t cover, drop it in the comments and I’ll do my best to help.